The hazards of using hold-back vessels during DP operations
- Recommended Practice
- Revision 0.1 - February 2024
This document discusses the hazards of using hold-back vessels during dynamic positioning (DP) operations, emphasising the associated risks, guidelines, and best practices.
Contents
Glossary
Introduction
Risk Reduction in Operations
Assisted DP Operations
Selection of the Hold-Back/Push Vessel
Practical Considerations
References
Revision
-
Rev. 0.1 - February 2024Refresh of page 2, reference links and layout (bookmarking); no change to content
-
Rev. - December 2022Initial publication