Safe use of FIBC (Flexible Intermediate Bulk Container)

  • Safety Flash
  • Published on 6 July 2020
  • Generated on 25 April 2025
  • IMCA SF 20/20
  • 2 minute read

What happened?

A Flexible Intermediate Bulk Container (FIBC ) containing 36 sand bags weighing approx. 25 kg each was being lifted from the quayside to the vessel.

As the load was lifted to approximately 1 metre, there was a routine inspection of the load to check the handle loops and that the base of the bag was OK before lifting.

The FIBC was raised to 3-5 metres when a distinctive tearing / ripping sound was heard, it was then the FIBC handle and stitching tore and the 900 kg of sand bags fell onto the quayside. There were no injuries.

36 sand bags weighing 900 kg being lifted in a Flexible Intermediate Bulk Container fell 3-5 m to the deck when the FIBC handle and stitching ripped

What actions were taken?

Always
  • Inspect FIBCs prior to use, ensuring that they are:
    • free from damage that can compromise its strength
    • free from any UV degradation (due to sunlight exposure)
    • free from chemical damage
  • Lift following manufacturer and supplier’s instructions.
  • Ensure the landing area is clear of sharp and protruding edges.
  • Ensure the filled FIBC is stable and secure during transportation.
  • Store in a suitable location protected from UV radiation and rain (long periods of storage).
  • Pad out forklift forks when lifting through lift handles to eliminate sharp edges.
Never
  • Drag or push FIBCs.
  • Stop/start suddenly when lifting (shock loading).
  • Allow suspended load to swing uncontrollably.
  • Lift by steel wires or similar devices which may present sharp edges or rough surfaces.
  • Use an FIBC which has exceeded 2 years from the date of manufacture.
  • Lift over personnel.

Note: If there is any doubt about the integrity of the FIBC, replace the FIBC or use a metal transfer basket/half height.

Members may wish to refer to:

Latest Safety Flashes:

Fatality following a fall from a wind turbine

The Scottish Courts and Tribunals Service, and UK HSE, has published a response to a fatal incident in which a crew member fell to their death.

Read more
UK HSE: Risk of collision with offshore installations from attendant vessels

The UK Health and Safety Executive (HSE) has published Safety Notice ED01-2025 relating to the risk of collision with offshore installations.

Read more
USCG: Hazardous Zone Markings and Safety Protocol Awareness

The United States Coastguard has published Safety Alert 04-25 relating to the importance of Hazardous Zone Markings and Safety Protocol Awareness.

Read more
BSEE: Crane safety awareness during offshore helideck operations

BSEE published Safety Alert 491 relating to a the investigation of a near miss crane incident on an offshore platform.

Read more
Incidents occurring during decommissioning

IMCA has put together a summary of incidents relating to decommissioning.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.