Crew member cut hand on broken glass during heavy weather

  • Safety Flash
  • Published on 14 August 2024
  • Generated on 26 December 2024
  • IMCA SF 16/24
  • 2 minute read

A member of the galley team suffered a serious hand injury when washing a glass during a period of heavy weather.

Hand and finger injuries

Members continue to report hand and finger injuries. In last year’s safety statistics, 42% of LTIs reported by IMCA members involved injuries caused when workers got into the Line of Fire. What do we need to do to stop workers putting their hands and fingers in dangerous places? We all want to get the job done – but that one quick pause, whilst we stop to think, could make ALL the difference. Think:

  • Is there a better way to do this?
  • Could I use a tool instead?
  • Should there be a guard? Should I have gloves on?
  • Is this still too hot to touch? Is it live or is it still spinning?  
  • Think carefully before putting your hands where you can’t see them.

What happened?

A member of the galley team suffered a serious hand injury when washing a glass during a period of heavy weather. The glass being washed slipped, hit the sink, and broke. The glass fragments struck the injured person’s left hand, causing an injury requiring seven stitches. The vessel was rolling in seas of approximately 2.5m.

Photo of serious hand injury

Serious hand injury

This photo may show graphic content.

Lessons

  • Think carefully about what activities are conducted during bad weather – ensure crew have full awareness of the increased risks during heavy weather;
  • Wearing gloves while washing dishes could have provided additional protection;
  • Reducing the number of hand and finger injuries remains a significant challenge for the industry. In 2023 a fifth of incidents shared as IMCA Safety Flashes involved hand or finger injuries.
    • Take the time to stop and think things through
    • Can this be task be done in a safer, easier way?
    • Am I putting my hands at risk by doing this job?
    • Am I putting my hands where I can’t guarantee their safety?
    • Am I putting my hands in the line of fire?
  • Are YOU prepared to work safely?

Latest Safety Flashes:

Structural failure of rescue boat

A rescue boat suffered a catastrophic structural failure whilst unattended on the davit.

Read more
High potential: spontaneous opening of hydraulic release shackle (HRS) pin

During lifting operations on a vessel, a hydraulic release shackle pin opened on its own.

Read more
NTSB: diesel generator engine failure

The National Transportation Safety Board of the United States (NTSB) published "Safer Seas Digest 2023".

Read more
LTI: fall from height during anchor chain handling operation

A worker fell through an opening from one deck to another, and was injured as a result.

Read more
Sudden disconnection of pressurised hose

A contractor was performing maintenance on the bulk cargo methanol system on deck of a vessel.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.