Crewman suffered first aid injury during cutting operations
- Safety Flash
- Published on 4 June 2014
- Generated on 26 December 2024
- IMCA SF 08/14
- 3 minute read
A member has reported an incident in which a crewman cut his thigh whilst using a hand grinder.
What happened?
The incident occurred when he was cutting a 900 mm diameter pipe’s bevel side to make a proper gap between the pipes. While beginning to work on the pipe, the cutting disc did not enter the cutting point (of the gap) correctly. This made the grinder slip and move away from its position and hit the injured person’s right inner thigh. The job was stopped immediately and the injured person was sent to the clinic for medical treatment (cleaning and dressing the wound). As per the medical treatment administered by the medic, the incident was classified as a First Aid Case.
Position of the injured person while cutting the bevel’s gap. Person stands in unstable position where he bent a little bit forward, his left leg and his knee totally lean onto the pipe
Reconstruction – Position of the injured person while the grinder accidentally hit no his right inner thigh (both hands still on the grinder)
Injured area, right inner thigh
Our member’s investigation revealed the following:
- The injured person was performing cutting activity standing on a portable scaffold platform that was not adjusted properly for the work.
- The scaffold was not suitable for the working height and the distance for the pipe that needed to be cut.
- This inadequate scaffold adjustment forced the injured person to stand in an unstable body position where his left leg was bent a little bit forward and the knee totally leaning onto the pipe.
- The injured person had 18 months experience in this function.
- He was wearing the correct PPE.
- The grinder had been inspected before the job and all proper safeguards were found to be correctly fitted and in place.
- The incident was witnessed by the foreman at the scene.
Our member concluded that the immediate and root causes were as follows:
- Immediate cause: improper position for task – the injured person was standing in an unstable position where he was bent forward with his left knee leaning fully on the pipe.
- Immediate cause: poor judgement -the injured person or his supervisor should have stopped the job and made sure the portable scaffold was adjusted properly for the work.
- Root cause: inadequate design criteria -the scaffold was not suitable for the working height and the distance for the pipe that needed to be cut.
Our member took the following corrective actions:
- Further safety discussion and toolbox talks.
- Proper training with the focus topic being that proper position of equipment and personnel is critical to a safe work site.
- Ensure proper working platform to be provided for working at height.
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.