Crane wire parting
- Safety Flash
- Published on 21 May 2013
- Generated on 26 December 2024
- IMCA SF 08/13
- 1 minute read
The Marine Safety Forum has published Safety Flash 13-11 regarding the parting of a crane wire on an offshore vessel.
This was partially due to the malfunction of the crane limiter switch, but also due to a failure to check that all the safety devices were functional.
A copy of the safety flash should be available on request from the Marine Safety Forum.
IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.
The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.
All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.
IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.
The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.
Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.