Crew transfer vessel (CTV) drifts onto turbine tower

  • Safety Flash
  • Published on 20 February 2025
  • Generated on 1 April 2026
  • IMCA SF 03/25
  • 2 minute read

A CTV drifted into and hit a nearby structure at 0.5 knots.

What happened?

A crew transfer from a CTV to a Service Operation Vessel (SOV) was successfully completed. The SOV was 180 metres from a wind turbine generator (WTG) on the field. The CTV moved away from the SOV and propulsion controls were set to zero, and the crew continued to complete reporting and administrative tasks.

The CTV drifted into and hit the nearby structure at 0.5 knots, prompting the CTV Master to immediately move ahead and away to a safe area while vessel hull checks and reporting was carried out. The WTG asset was also inspected and some damage to the paintwork was noted. No-one was injured.

What went wrong?

  • Administrative tasks were prioritised immediately after the crew transfer, rather than maintaining situational awareness.
  • The instrumentation on the bridge of the CTV was not set up to warn of an imminent allision.
  • Authority had been granted for the crew transfer to take place inside the WTG safety zone. The crew transfer should not have been authorised in this location.

Lessons learned

  • The temptation to get administrative tasks out of the way should be resisted: Bridge crew should stay alert, maintain a good lookout and good situational awareness until a vessel is in a safe location after carrying out transfer operations.

-          Is there sufficient time to do these administrative tasks? Are CTV bridges appropriately crewed?

  •  Work Authorisation should consider vessel position in relation to fixed assets as well as wind / sea conditions.

Latest Safety Flashes:

MAIB: Sinking of tug Biter with loss of two lives

MAIB has published Accident Investigation 17/2024 relating to the girting and capsize of tug Biter with the loss of two lives.

Read more
Dropped object – strop parted over sharp edge

A cylinder was lifted to a height of approximately 6 metres over deck of the vessel, the sharp steel edges of the cylinder cut through the firehose protection and caused the strop to part.

Read more
Person injured when pry bar slipped

A crew member who was applying downward pressure to their pry bar to lift a track, fell towards the deck when the pry bar slipped.

Read more
MSF: High potential near miss during FRC maintenance

The Marine Safety Forum has published Safety Alert 26-01 relating to an incident where there was an unplanned lowering of an FRC to the sea

Read more
BSEE: Crane incident leads to serious facial injuries

BSEE has published Safety Alert 512 relating to a crane incident during well abandonment which led to a worker being struck and suffering serious facial injuries.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.