Diver in the bell hit by falling object

  • Safety Flash
  • Published on 9 January 2024
  • Generated on 15 February 2025
  • IMCA SF 01/24
  • 2 minute read

A diver in the diving bell was hit and slightly injured by a water bottle containing a gallon of water.

What happened?

A diver in the diving bell was hit and slightly injured by a water bottle containing a gallon of water (4.5kg). Diver #1 left the bell and was handing over to the next bellman. In the bell the remaining divers were organizing their gear before departing the bell. They were moving a partially frozen one gallon water bottles when a handle on a water bottle broke and the bottle fell into the transfer lock striking the diver #1 on left side of his head and then onto his shoulder.

The diver received medical attention; he had an abrasion on his head and a red mark on his shoulder. He was able to continue the Sat run reporting only minor soreness over two days, eventually back to normal.

Diver in the bell hit by falling object

What went wrong?

The handle of the frozen water bottle broke and fell on the diver standing at the bottom of the transfer lock.

What was the cause?

The bell temperature was elevated due to shallow water diving and the bell being well insulated. Divers were bringing in frozen bottles of water to help lower the internal temperature.

Lessons learned and action:

  • Our member noted the following:
  • Deviation from procedure, no matter how minimal has the potential to trigger an event leading to accident.
  • No risk assessment was completed for this change in operation.
  • A “Hazard Hunt” was initiated – focusing on routine tasks.
  • Arrangements were started for installing a diving bell chiller to regulate higher temperatures.
  • Updated a Management of Change process and risk assessment for continued use of frozen bottles as a short-term solution, focusing specifically on proper securement and material handling to prevent dropped objects.

Latest Safety Flashes:

Saturation diver exposed to chemicals from pipeline

During pigging and decommissioning operations, a saturation diver was exposed to the contents of a pipeline.

Read more
MAIB: Parted mooring rope leads to fatality

A deck officer was killed during mooring operations when a mooring rope parted and struck him on the head.

Read more
Confined space entry hot work fatality

An incident was brought to IMCA’s attention relating to a confined space entry hot work fatality in a shipyard.

Read more
MAIB: Vessel cook injured by spillage of burning cooking oil

Cook receives burns from oil spill due to faulty thermostat. 

Read more
MAIB: Step-ladder failure (LTI)

A crew member was working while stood on the top step of a small folding stepladder when the step gave way.

Read more

IMCA Safety Flashes summarise key safety matters and incidents, allowing lessons to be more easily learnt for the benefit of the entire offshore industry.

The effectiveness of the IMCA Safety Flash system depends on the industry sharing information and so avoiding repeat incidents. Incidents are classified according to IOGP's Life Saving Rules.

All information is anonymised or sanitised, as appropriate, and warnings for graphic content included where possible.

IMCA makes every effort to ensure both the accuracy and reliability of the information shared, but is not be liable for any guidance and/or recommendation and/or statement herein contained.

The information contained in this document does not fulfil or replace any individual's or Member's legal, regulatory or other duties or obligations in respect of their operations. Individuals and Members remain solely responsible for the safe, lawful and proper conduct of their operations.

Share your safety incidents with IMCA online. Sign-up to receive Safety Flashes straight to your email.